Dirt Mechanic Rey Guiyab, repair of Vios front shock rubber mount

 Did you experience this;   lagutok of front shock when there are bumps?  All you need to check and repair are the rubber shock mounts that could be easily done diy.

1.  Remove top No. 17 nut

2.  Remove wheels

3.  Remove the mounting of abs and brakes lines

4.  Remove the two large front bolts to steering mount;

5. Remove stablizer

6.  REmove shock from mount

7.  Compress spring

8.  Remove the rubber dumper

9.  Clean shock shaft

10.  Install the rubber mount

11.  Decompress spring slowly

12. Install the shock at the mount

13.  Attach all the bolts removed

14.  Remount wheels

15.  Tighten the 17 mm mounting bolt at the strut tower. inside the engine compartment.

FINISH