Easyng2 pala pag adjust ng rear parking brake. Linis lang adjust lang ng brake adjuster. If the pads are still thick. Otherwise, replace brake pads. If not sandpaper pads.
How to increase your value as a person, as a husband, save money, and not to be dependent on repair shop. If they sense that you do not know, they may rip you off. Learn and be wise
Monday, January 27, 2025
Tali System in aligning wheels
When you are in a hurry Rey Guiyab showed that you can align the wheels using tali method. Use string from back up to the front and along side of the vehicle, Adjust tie rod adjustment to make the wheel come nearer and or farther from the string. Or better mark the tie rod adjustment before removal
Dirt Mechanic Rey Guiyab, repair of Vios front shock rubber mount
Did you experience this; lagutok of front shock when there are bumps? All you need to check and repair are the rubber shock mounts that could be easily done diy.
1. Remove top No. 17 nut
2. Remove wheels
3. Remove the mounting of abs and brakes lines
4. Remove the two large front bolts to steering mount;
5. Remove stablizer
6. REmove shock from mount
7. Compress spring
8. Remove the rubber dumper
9. Clean shock shaft
10. Install the rubber mount
11. Decompress spring slowly
12. Install the shock at the mount
13. Attach all the bolts removed
14. Remount wheels
15. Tighten the 17 mm mounting bolt at the strut tower. inside the engine compartment.
FINISH
Black smoke after replacing turbos and injector
It could be due to the intercooler. Signs of defective intercooler: black soot and oil at the underside from the leak.

-
I have watched his video from FB. I noticed this Visayan speaking mechanic from Oroquieta: 1. Most of defective vehicles are from Ford; 2....
-
To prevent rusting, use 3/16 nickel copper lines. Do not use compression junctions. They may produce catastrophic spilling and failure....
-
It is very fun and educational to go through with repairs of Matt, making almost junk equipment run agian This time it was a water soaked ...