Easyng2 pala pag adjust ng rear parking brake. Linis lang adjust lang ng brake adjuster. If the pads are still thick. Otherwise, replace brake pads. If not sandpaper pads.
How to increase your value as a person, as a husband, save money, and not to be dependent on repair shop. If they sense that you do not know, they may rip you off. Learn and be wise
Monday, January 27, 2025
Friday, January 24, 2025
Repairing stiff clutch pedal
Most mechanics would recommend a P40K transmission take down and repair. But it would cost not more than P1,000 to repair this. All you need is understanding the mechanical principles, having some tools and common sense.
The cause of the hard pedal would be worn out slave piston assembly, dirty hydraulic (brake fluid) stuck up spring.
You can remove the piston and the attachment to the clutch fork lever. Then remove the piston from the assembly. Its either you replace the rubber, the piston (or sand paper the piston and the cylinder. Then bleed. With these procedures, the clutch pedal should work all right afterwards.
Black smoke after replacing turbos and injector
It could be due to the intercooler. Signs of defective intercooler: black soot and oil at the underside from the leak.

-
I have watched his video from FB. I noticed this Visayan speaking mechanic from Oroquieta: 1. Most of defective vehicles are from Ford; 2....
-
To prevent rusting, use 3/16 nickel copper lines. Do not use compression junctions. They may produce catastrophic spilling and failure....
-
It is very fun and educational to go through with repairs of Matt, making almost junk equipment run agian This time it was a water soaked ...